1、礼品盒包装出现翘角现象。
1, gift box packaging appears the phenomenon of raised angle.
出现这种情况的主要原因是贴的张数太多，而导致纸板边沿的胶已干而不能粘住。所以通常应在贴二十张就压榨较为合适。
The main reason for this is that too many sheets are pasted, leading to the edge of the cardboard adhesive has been dry and can not stick. Therefore, it is usually appropriate to press twenty sheets.
2、礼品盒包装纸的湿度太大，特别是针对金卡的平贴。
2, the humidity of gift box wrapping paper is too large, especially for gold card.
主要是由于金卡纸对水份的渗透和散失能力很差，而普通的平贴胶其含水量本身较高。所以通常用快干胶或将产品展开置于阳光下晾晒来解决。
It is mainly due to the poor permeability and loss of moisture in gold cardboard, while the plain adhesive has a higher moisture content. So we usually use quick drying glue or expand the product in the sun to solve the problem.
3、所裱瓦或平贴的礼品盒盒，假如在空气湿度较大的环境下，放置时间稍长会出现变黄等现象。
3. The mounted tiles or flat-pasted gift boxes, if in the air humidity environment, a little longer time will appear yellowing and other phenomena.
主要是由于部分厂家采用了含碱性很大的水玻璃胶或淀粉胶所致。所以为了保证礼品盒包装的质量我们应该选用质量较好的平贴和瓦楞胶。
The main reason is that some manufacturers use alkaline glass glue or starch glue. Therefore, in order to ensure the quality of gift box packaging, we should use better quality flat paste and corrugated glue.
4、礼品盒包装出现脱层现象，主要由于粘接剂的强度不够所致，建议选用一些正规厂家的产品，这样既能保证强度，减少湿度，增加挺度，又能进步礼品盒包装产品质量和档次。
4. The delamination of gift box packaging is mainly due to the insufficient strength of adhesive. It is suggested to select some products from regular manufacturers, which can not only ensure strength, reduce humidity, increase stiffness, but also improve the quality and grade of gift box packaging products.
山东龙彻国际贸易有限公司成立于2015年, 注册资本501万元，现已ISO9001质量管理体系认证。是以提供客户全方位优质服务，是集设计、开发、营销于一体的综合性的礼品公司，经营产品涉及电子产品、工艺品、家居纺织日用品、食品及各种不同价位 |
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。